Psa Xs Evolution Drivers Upd: Actia

Original Actia kits come with a CD labeled "USB Drivers for PSA XS Evolution." The driver files are also typically located inside the DiagBox installation folder at: C:\Program Files (x86)\PSA\DiagBox\Drivers\Actia_USB

With your drivers correctly installed, the Actia PSA XS Evolution becomes the powerful, reliable diagnostic station it was designed to be. Whether you are reprogramming a BSI, resetting an airbag ECU, or performing a diesel particulate filter regeneration, you will do so with confidence—because the link between your software and the car is finally perfect.

The ACTIA PSA XS Evolution interface acts as a bridge between your car’s OBD2 port and your computer. For Diagbox or Lexia software to recognize the device, Windows must load the proprietary ACTIA USB driver. Driver Types and Versions actia psa xs evolution drivers

: Windows should attempt to detect the device. If it fails, open Device Manager and look for a "USB-to-CAN" or "ACTIA" entry with a yellow exclamation mark.

This standalone utility often includes the necessary driver package to help the PC "see" the tool before the main software runs. Original Actia kits come with a CD labeled

Some driver packages available online claim compatibility with both 32-bit and 64-bit systems but contain only 64-bit installers. When run on 32-bit Windows, these installers fail. The solution is to obtain a proper 32-bit driver package or use a 64-bit operating system if your hardware supports it.

Plug the device into every USB port on the laptop to ensure the driver is initialized for each one. For Diagbox or Lexia software to recognize the

Look for an item with a yellow exclamation mark named or "ACTIA USB Com Board" . Right-click the device and choose Update driver . Select "Browse my computer for drivers" .

If your Diagbox version requires a higher firmware (e.g., Firmware V4.3.7 for Diagbox 9.x), click to select the correct .HEX firmware file.

Connect the other end to the vehicle's OBD2 port to provide 12V power to the interface. The LED light on the unit should flash briefly and then stay solid or turn off depending on your hardware revision. Step 3: Verify or Manually Update via Device Manager If Windows does not automatically assign the driver: