Autodata The Hardware Information Does Not Match With Your Dongle Jun 2026

Return to your Autodata files and find the emulator folder (often named AuDaSO or Emulator ).

CAUTION: The following steps apply only if you are using a cracked or emulated version of the software, which is not recommended and may be illegal. Proceed at your own risk. This error often indicates a problem with the emulator or its license file.

Swapping a motherboard, CPU, or network card alters your PC's hardware ID. Return to your Autodata files and find the

Older versions of Autodata (like 3.38 or 3.45) struggle with Windows 10 and 11 security features. Right-click the Autodata shortcut. Select > Compatibility . Check Run this program as an administrator . Try running it in compatibility mode for Windows 7 . 🛡️ Preventing Future Errors

Open your license generator or Keygen program, input this exact code, and click generate. This error often indicates a problem with the

Understanding the "why" behind the "hardware information does not match with your dongle" error is the first step to a solution. By systematically following the diagnostic and troubleshooting steps in this guide, you can identify the root cause and get your Autodata software back up and running.

Check if the LED light on the dongle is solid; a blinking or dark light suggests a hardware failure. Avoid using USB hubs; plug the device directly into the PC. 2. Reinstall Dongle Drivers Right-click the Autodata shortcut

This issue primarily plagues legacy desktop installations of Autodata (such as versions 3.38, 3.40, and 3.45) running on modern Operating Systems like Windows 7, 10, or 11. Why This Error Happens

This specific dongle mismatch often leads to a "Runtime Error 217". Navigate to your Autodata installation folder. Locate the regsvr.bat file.