By using this website, you accept the Terms of Service and acknowledge that you are familiar with our Privacy Policy.
You can define the conditions for storing or accessing cookies in your browser settings.
Before grabbing your tools, clear a large workspace in the room where the crib will permanently stay. Moving a fully assembled solid wood crib through narrow bedroom doorways is incredibly difficult. Required Tools & Hardware
Open the metal support brackets into a "Y" shape and secure them to the corner posts using wing nuts or bolts. Set to the highest position. Active Babies:
Screw the threaded feet tightly into the bottom holes of the legs on both the headboard and the footboard.
Here's a step-by-step guide to assembling your Babi Italia Parkland Convertible Crib: Before grabbing your tools, clear a large workspace
: You typically need a Phillips-head screwdriver and an Allen wrench (often provided in the hardware kit).
Ensure the flat side of the spring frame faces upward, and the tabs point down.
The standard crib setup consists of four primary structural components: the high back headboard, the lower front footboard, two side panels (left and right), and the metal mattress support frame. Step 1: Attach Corner Posts to the Headboard Set to the highest position
Ultimate Guide to Babi Italia Parkland Convertible Crib Assembly
Screw the threaded feet into the bottom of the headboard and footboard panels. Attach Stabilizer Bars:
Your crib is assembled, but the job isn't over. A responsible parent always stays vigilant. Ensure the flat side of the spring frame
Note: Older Babi Italia models had drop sides, which are now banned in the US. The Parkland is a fixed-side crib.
Mattress support and conversion instructions
Insert the medium or short bolts through the mattress frame brackets and into the side panels. Tighten securely with your Allen wrench. Step 3: Attach the Front Footboard Now you will close the frame of the crib.
To adjust the height, simply remove the mattress, unscrew the four bolts holding the spring frame brackets to the corner posts, shift the frame downward to the next set of pre-drilled holes, and re-tighten the hardware securely. Converting the Babi Italia Parkland Crib
Stand the large upright against a wall for support.