Support for integrated communications, such as GPRS, enables direct connection to utility management systems. 7. Extensions for Custom Applications
The Mk6N is typically housed in a durable polycarbonate case suitable for panel mounting or DIN rail mounting (depending on the specific chassis variant).
The meter contains an expansive non-volatile memory block capable of storing extensive historical data without power. edmi mk6n genius user manual
Trigger events such as a remote alarm, send an SMS to a programmable number, or send alarm messages via GPRS to a server.
The "Genius" moniker stems from the meter's ability to handle complex data tasks beyond basic energy counting. Multi-Tariff and Time-of-Use (TOU) Support for integrated communications, such as GPRS, enables
The meter uses standardized Object Identification System (OBIS) codes to label data on the screen. Reset Count (Number of billing periods closed). 1.8.0: Total Active Energy Import (Total kWh consumed).
The EDMI MK6N Genius has a range of key features that make it an advanced smart meter. Some of the key features include: The meter contains an expansive non-volatile memory block
| Step | Action | Description | | :--- | :--- | :--- | | 1 | Verify Physical Connection and COM Port Settings | Check that the communication cable (optical probe or serial cable) is securely connected. Confirm the correct COM port and baud rate are selected in the EziView connection properties. | | 2 | Try Alternative Protocol Settings | If the standard settings fail, try different communication parameters. One solution is to select a "Landis+Gyr" device profile and set the starting protocol to "DLMS". This has been reported to work as a valid workaround. | | 3 | Check Pin Configuration on Serial Ports | Verify correct pin assignments for the SCADA port (lower serial port). For a "Type 7" serial port, ensure RX2 and TX2 pins are correctly wired and crossed (TX of the meter to RX of the computer, and vice versa). | | 4 | Inspect Cabling | Check the communication cable for damage or incorrect wiring. | | 5 | Check EziView Security Settings | Ensure you are using the correct username and password for the meter. If your standard login fails, use the "Alternate Logon" option with the factory default credentials. | | 6 | Review Meter Security Configuration | Ensure the assigned user group has the necessary access permissions. |