Epson Wfc5790 Admin Password Jun 2026

If you've forgotten the admin password for your Epson WorkForce Pro WFC5790 printer, don't worry. Resetting it is a manageable process. Here's a step-by-step guide to help you regain access:

This does not work on all firmware versions. Epson has patched some older bypass methods.

If you've changed the admin password but can't remember it, you'll need to reset it. Here's how you can do it:

If you have tried the serial number, access , and a full factory reset, but are still locked out, consider these troubleshooting steps: epson wfc5790 admin password

On the printer screen, go to Settings > Network Settings > Network Status . Write down the IP address (e.g.,

You can manage the password directly from the printer's control panel: Press the button.

First, check the back of your printer for a label with a barcode. The 8-digit number printed above it, like 03212791 in their example, is very likely your default password. If there's no label, your printer's (without any * symbols) usually serves as the password. If you've forgotten the admin password for your

If you are prompted for a password just to enter the settings menu, you must trigger a hard reset: Turn off the printer completely.

Disclaimer: This is an advanced step. Do not use this for routine maintenance.

Press the button to select it, then the Stop button to confirm. Epson has patched some older bypass methods

, the default administrator password is not a generic word like "admin." Instead, it is unique to each device to improve out-of-the-box security.

On the printer’s control panel, go to Settings > Network Settings > Network Status and print the network status sheet.