Ericsson Mini Link Cli Commands Hot! Jun 2026

Loopbacks help isolate whether a fault resides in the local equipment, the radio path, or the remote node.

configure interface ip

The active alarms show what is broken now , but the log shows what broke yesterday . ericsson mini link cli commands

The Ericsson MINI-LINK series uses a Command Line Interface (CLI) for advanced configuration, troubleshooting, and monitoring of microwave transmission links. Access is typically gained via SSH, Telnet, or a local craft port. Core Management Commands

Ensuring the node is accessible from the Operation and Maintenance Center (OMC) is essential. show ip interface Use code with caution. View Routing Table: show ip route Use code with caution. Add Static Route: configure ip route exit Use code with caution. 6. Troubleshooting and Performance Monitoring Loopbacks help isolate whether a fault resides in

To make this information more practical, here is a consolidated table of key CLI commands grouped by their function:

Often user: admin , password: password or ericsson (dependent on setup). Accessing Modes: User EXEC Mode: > prompt (limited commands). Privileged EXEC Mode: # prompt. Switch using: enable Use code with caution. Configuration Mode: # prompt. Switch using: configure Use code with caution. Hidden Commands: For advanced troubleshooting, use: cliunlock Use code with caution. Access is typically gained via SSH, Telnet, or

enable configure terminal hostname SiteA-Radio1 interface vlan 1 ip address 10.0.0.1/30 interface radio 1 frequency 18000 tx-power 15 bandwidth 28 modulation adaptive exit interface ethernet 1 description "To Router" speed 1000 no shutdown copy running-config startup-config

copy startup-config running-config

Example script eth-settings.txt :