If you need help configuring a specific programming routine, tell me:
Are you programming for a or a mill (machining center) ?
Used for standard outer diameter (OD) turning when cutting toward the chuck.
The "TF Plus" designation indicates an evolution from the standard TF model. The manual highlights features specific to the Plus hardware and software:
The manual defines several key coordinate systems:
Used for peck-grooving on the outer diameter or cutting a finished piece off the bar stock. G75 R0.5; G75 X30.0 Z-40.0 P3000 Q2000 F0.08; Use code with caution.
Seamlessly coordinates multiple axes for complex geometries.
Enables parameterized programming for parametric part families.
This manual is fundamental for any professional looking to master the 0i-TF Plus system, as it transforms raw hardware into a fully functional machining center.
P3000 : Peck increment on X-axis (expressed in microns, 3000 = 3mm).
Fanuc Series Oitf Plus Programming Manual -
If you need help configuring a specific programming routine, tell me:
Are you programming for a or a mill (machining center) ?
Used for standard outer diameter (OD) turning when cutting toward the chuck. fanuc series oitf plus programming manual
The "TF Plus" designation indicates an evolution from the standard TF model. The manual highlights features specific to the Plus hardware and software:
The manual defines several key coordinate systems: If you need help configuring a specific programming
Used for peck-grooving on the outer diameter or cutting a finished piece off the bar stock. G75 R0.5; G75 X30.0 Z-40.0 P3000 Q2000 F0.08; Use code with caution.
Seamlessly coordinates multiple axes for complex geometries. The manual highlights features specific to the Plus
Enables parameterized programming for parametric part families.
This manual is fundamental for any professional looking to master the 0i-TF Plus system, as it transforms raw hardware into a fully functional machining center.
P3000 : Peck increment on X-axis (expressed in microns, 3000 = 3mm).