Gamecube Rom Highly Compressed Portable (2027)

without losing any data or "junk" files required for some older compression methods. Performance : Unlike older formats like

When looking for "GameCube ROM highly compressed portable" downloads, be cautious. Many sites that promise "highly compressed" 10MB versions of 1GB games are often providing malware or "repacks" that don't work.

Set your to point to the folder containing your standard GameCube .ISO files. gamecube rom highly compressed portable

Example file sizes (RVZ vs. ISO): | Game | ISO Size | Highly Compressed RVZ | |------|----------|------------------------| | Luigi's Mansion | 1.35 GB | 270 MB | | Super Mario Sunshine | 1.35 GB | 520 MB | | The Legend of Zelda: Wind Waker | 1.35 GB | 490 MB | | Resident Evil 4 (2 discs) | 2.7 GB | 1.1 GB total |

“Highly compressed” involves two stages: without losing any data or "junk" files required

Developed specifically by the creators of the Dolphin Emulator, the .gcz format was the long-standing gold standard for GameCube compression. It actively compresses the file while breaking it into small blocks, allowing the emulator to read data on the fly without needing to unpack the entire game into your system's RAM. 3. The RVZ Format ( .rvz ) — The Modern Standard

Leave the compression level at the default (ZStd is recommended for the best balance of speed and size). Click . Set your to point to the folder containing

The "portable" element of this trend is the driving force. The GameCube was a stationary beast, tethered to a living room television. The modern emulator liberates the software from the hardware. The ability to carry an entire console library in a pocket would have seemed like science fiction to a gamer in 2002. The compression of these ROMs is the fuel for this time travel. It allows low-powered devices to emulate complex systems by reducing the load times and storage requirements, effectively democratizing access to the hardware.

37 Comments

cvat

Dec 16, 2010 at 6:41 AM
Reply

Thank you !! you my hero !

Dtavare

Dec 16, 2010 at 6:39 PM
Reply

Sweeeeeeeet….
Thanks for the php_http.dll x64 extension…

david

Dec 16, 2010 at 7:29 PM
Reply

Thank you!!
It is awesome!

The only thing I am missing is the php_zip. Did you already try to compile it?

Anindya Author

Dec 16, 2010 at 7:40 PM
Reply

@cvat, @Dtavare and @david

You’re welcome. 😀

@david

The php_zip extension is present as a static extension which is why there is no php_zip.dll file. Check your phpinfo().

david

Dec 16, 2010 at 7:42 PM
Reply

Thanks!

I just upgraded from php5.2. Didn’t know it was static! Great!

forque

Dec 17, 2010 at 2:47 AM
Reply

Anindya, thank you!

btw, is this a bug: enabling APC extension leads to many errors such as “Notice: Unknown: 1. h->opened_path=[null] …” in every php file, and gives warnings and notices with every include and require? The only bug report fitting the description is here: http://pecl.php.net/bugs/bug.php?id=17141
Everything works fine with ‘apc.cache_by_default = 0’ though..

forque

Dec 17, 2010 at 2:56 AM
Reply

also, check this out: http://pecl.php.net/bugs/bug.php?id=19836
disabling memprotect may resolve the issue

Anindya Author

Dec 17, 2010 at 3:27 PM
Reply

Ah, memprotect was probably enabled by the “–enable-snapshot-build” flag. Will compile it again without memprotect. Thanks for letting me know. 🙂

Anindya Author

Dec 17, 2010 at 8:47 PM
Reply

Here is the php_apc.dll without memprotect. Try it.

forque

Dec 17, 2010 at 11:31 PM
Reply

All errors are gone now, thanks a lot!

kos

Dec 27, 2010 at 7:20 AM
Reply

hi, I tried to download this. but link was not working. can you upload the sf again.

Anindya Author

Dec 30, 2010 at 4:38 PM
Reply

@kos

Sorry for the late reply. By the time I saw your comment the links were working again. I hope you were able to download by now. 🙂

mrSwede

Jan 2, 2011 at 7:08 PM
Reply

Thanks so much for both PHP and Apache, running both of your builds here.

Anyone else have problems enabling the GetText extension, for me PHP stops working ?

Daniel

Jan 3, 2011 at 8:20 PM
Reply

Hi, thanks for a great release.

I use curl a lot. After enable the php_curl.dll extension php/apache wont start, complaining about php_curl.dll isn’t “a vaild Win32-program”

Any idea about this?

Daniel

Jan 3, 2011 at 8:28 PM
Reply

sorry for my reply, should have searched more…

here’s how to fix curl:

1. Curl depends on ssleay32.dll and libeay32.dll they’re in the php folder.
2. Be sure those files are accesible in a folder of the path.

Anindya Author

Jan 4, 2011 at 7:07 AM
Reply

@mrSwede

I can enable gettext extension without any problems. So not sure why you are having trouble enabling it.

@Daniel

You can also just add the php folder to the Path environment variable.

Francesco

Jan 17, 2011 at 7:16 PM
Reply

Hi all, and thanx for your job.
btw, i cannot run php5.3.4×64 with YOUR Apache 2.2.17×64:
commenting out lines for php in httpd.conf (LoadModule… AddType… PHPIniDir) apache works… when i try to “run” it with php534 apache do not start.

Windows Events Log says:
Nome dell’applicazione che ha generato l’errore: httpd.exe, versione: 2.2.17.0, timestamp: 0x4cc421d6
Nome del modulo che ha generato l’errore: php5ts.dll, versione: 5.3.4.0, timestamp: 0x4d0904d8
Codice eccezione: 0xc0000005
Offset errore 0x0000000000127929
ID processo che ha generato l’errore: 0x1920
Ora di avvio dell’applicazione che ha generato l’errore: 0x01cbb676acf97e04
Percorso dell’applicazione che ha generato l’errore: C:\Program Files\Apache Software Foundation\Apache2.2\bin\httpd.exe
Percorso del modulo che ha generato l’errore: C:\php\php5ts.dll

this error occurs with every your php5.3×64 version…. with ver. 5.2.6×64 it works well..
(“C:\php” is in system path variable correctly)
Any idea to solve this? Thank you in advance..

Anindya Author
Jan 17, 2011 at 7:30 PM
What extensions have you enabled in your php.ini file? Please post both your httpd.conf file and your php.ini file if possible. Also, you have not mentioned the version of Windows that you are using.

sink

Jan 19, 2011 at 3:21 AM
Reply

Thank you.
Who have PHP 5.3 vc6 x64 for Apache?

ADT

Jan 19, 2011 at 1:53 PM
Reply

Hi!

@Francesco
Maybe Apache is using the old php5ts.dll somehow! Possibly there is another version of the file in a “higher” place reguarding the order of your %PATH%-variable (Maybe in your Windows/system32-folder)

@Anindya
PHP 5.3.5 and OpenSSL 1.0.0c (Apache) are available

Anindya Author

Jan 20, 2011 at 4:19 PM
Reply

@sink

I don’t think it’s possible to compile 64 bit PHP binaries with VC6 since it does not have 64 bit compiler. Why do you want VC6 binaries anyway? Even in the case of 32 bit PHP, the VC9 binaries provide better performance compared to VC6 ones.

@ADT

Thanks for letting me know. I will try and compile PHP 5.3.5 on this weekend. And I will include the latest version of OpenSSL with the next release of Apache.

Blair

Jan 20, 2011 at 5:11 PM
Reply

Thanks for these. I was looking for APC that worked with WAMP 2.1e 64bit on Windows 7 and these worked perfectly.

Just a suggestion, can you update your original post with the updated php_apc.dll without memprotect as I’m sure a lot of people won’t go looking through the comments to find the version that works nicely.

Blair

Jan 20, 2011 at 5:12 PM
Reply

Sorry, I meant WampServer 2.1d. Apparently I can’t edit my comment.

Francesco

Jan 21, 2011 at 2:17 PM
Reply

my machine: windows 7×64…

I got it….
I worked hard to find the process wich was listening on port:80 and caused installation troubles…(SQL reporting service..!!!)
just uninstall that…and now my “orchestra” is playing good..!
bye… and thx to all… 😉

Pieter du Plooy

Jan 25, 2011 at 6:26 PM
Reply

Hi there.

Is it possible for you to give me an ETA of when the 5.3.5 64 bit binary will be finished?

Regards

Pieter

Anindya Author

Jan 25, 2011 at 6:32 PM
Reply

I was thinking about compiling it last weekend but didn’t get time. Will try to compile tomorrow or definitely this weekend.

Tigran

Jan 30, 2011 at 2:56 PM
Reply

Do you plan to publish a fresh version of php x64 and apache x64 today?
If not, I will be very appreciated, if you specify the ETA 🙂 Thank you very much!

Anindya Author
Jan 30, 2011 at 3:09 PM
Yes, new version of PHP but not Apache. There hasn’t been any new version of Apache since 2.2.17. Will post 2.2.18 when it’s released.
I already compiled PHP 5.3.5 yesterday and will post it today after some testing.

Tigran

Jan 30, 2011 at 3:15 PM
Reply

Thank you very much! 🙂

Walter

Jun 4, 2011 at 4:33 AM
Reply

Seems the APC link is dead again.

Anindya Author

Jun 4, 2011 at 5:37 PM
Reply

You can find APC 3.1.6 in the PHP 5.3.6 post – http://www.anindya.com/php-5-3-6-x64-64-bit-for-windows/. I will compile newer version along with the next version of PHP 5.3.

Walter

Aug 10, 2011 at 10:02 PM
Reply

How do I get PEAR installed with this build?

Evan

Sep 8, 2011 at 10:50 PM
Reply

Hi, i need to find out what specefic apc version i need.

Im running

PHP version: 5.3.4.0
Thread Saftey Enabled
VC6
Apache Version 2.2.16.0
OS : Windows Server 2008 R2 x64

Each php_apc.dll i try causes apache not to load, any tips would be appreciated.

Abilene Fránquez

Apr 4, 2012 at 6:25 AM
Reply

Thank you sooooooooooooooooooooo much! n_n

Gerardo Flores

Sep 27, 2012 at 3:56 AM
Reply

Hello, thank you for posting. I wonder if you can help me, I’ve been trying to install apc on wamp 2.2 on a windows 7 x64 to no avail. I see you have a lot of apc dlls on your downloads on mediafire, I can’t imagine why. Must all of them be installed, (obviously not), then which of them? I downloaded php_apc without memprotect and was able to select it in the task switcher on wamp, I also added the extension and the following:

[APC]
apc.enabled = 1
apc.shm_segments = 1
apc.shm_size = 64M
apc.max_file_size = 10M
apc.stat = 1

to php.ini, next, downloaded apc.php from http://svn.php.net, but my phpinfo() file doesn’t show apc no matter what I do, and apc.php says it isn’t running.

Alan

Jan 7, 2013 at 2:56 PM
Reply

Hi
Need help i download apc.dll from your link : http://www.mediafire.com/file/jugie86axdfxod6/php_apc.dll

I get the error:
PHP Warning: PHP Startup: apc: Unable to initialize module\nModule compiled with module API=20090626\nPHP compiled with module API=20100525\nThese options need to match\n in Unknown on line 0

I’m using wampserver 2.2 php 5.4.3 apache 2.4.2 or 2.2.22, Compiler :MSVC9 (Visual C++ 2008)
Don’t know which dll i need ..Help please…
Thanks in advance

junicode

Feb 10, 2015 at 10:43 PM
Reply

Mince!! ça devenais même quoi? Depuis 2h,?, tuips.
Tu m’as sauvé gars! merci.

cvat
Dec 16, 2010 at 6:41 AM
Thank you !! you my hero !
Dtavare
Dec 16, 2010 at 6:39 PM
Sweeeeeeeet….
Thanks for the php_http.dll x64 extension…
david
Dec 16, 2010 at 7:29 PM
Thank you!!
It is awesome!
The only thing I am missing is the php_zip. Did you already try to compile it?
Anindya Author
Dec 16, 2010 at 7:40 PM
@cvat, @Dtavare and @david
You’re welcome. 😀
@david
The php_zip extension is present as a static extension which is why there is no php_zip.dll file. Check your phpinfo().
david
Dec 16, 2010 at 7:42 PM
Thanks!
I just upgraded from php5.2. Didn’t know it was static! Great!
forque
Dec 17, 2010 at 2:47 AM
Anindya, thank you!
btw, is this a bug: enabling APC extension leads to many errors such as “Notice: Unknown: 1. h->opened_path=[null] …” in every php file, and gives warnings and notices with every include and require? The only bug report fitting the description is here: http://pecl.php.net/bugs/bug.php?id=17141
Everything works fine with ‘apc.cache_by_default = 0’ though..
forque
Dec 17, 2010 at 2:56 AM
also, check this out: http://pecl.php.net/bugs/bug.php?id=19836
disabling memprotect may resolve the issue
Anindya Author
Dec 17, 2010 at 3:27 PM
Ah, memprotect was probably enabled by the “–enable-snapshot-build” flag. Will compile it again without memprotect. Thanks for letting me know. 🙂
Anindya Author
Dec 17, 2010 at 8:47 PM
Here is the php_apc.dll without memprotect. Try it.
forque
Dec 17, 2010 at 11:31 PM
All errors are gone now, thanks a lot!
kos
Dec 27, 2010 at 7:20 AM
hi, I tried to download this. but link was not working. can you upload the sf again.
Anindya Author
Dec 30, 2010 at 4:38 PM
@kos
Sorry for the late reply. By the time I saw your comment the links were working again. I hope you were able to download by now. 🙂
mrSwede
Jan 2, 2011 at 7:08 PM
Thanks so much for both PHP and Apache, running both of your builds here.
Anyone else have problems enabling the GetText extension, for me PHP stops working ?
Daniel
Jan 3, 2011 at 8:20 PM
Hi, thanks for a great release.
I use curl a lot. After enable the php_curl.dll extension php/apache wont start, complaining about php_curl.dll isn’t “a vaild Win32-program”
Any idea about this?
Daniel
Jan 3, 2011 at 8:28 PM
sorry for my reply, should have searched more…
here’s how to fix curl:
1. Curl depends on ssleay32.dll and libeay32.dll they’re in the php folder.
2. Be sure those files are accesible in a folder of the path.
Anindya Author
Jan 4, 2011 at 7:07 AM
@mrSwede
I can enable gettext extension without any problems. So not sure why you are having trouble enabling it.
@Daniel
You can also just add the php folder to the Path environment variable.
Francesco
Jan 17, 2011 at 7:16 PM
Hi all, and thanx for your job.
btw, i cannot run php5.3.4×64 with YOUR Apache 2.2.17×64:
commenting out lines for php in httpd.conf (LoadModule… AddType… PHPIniDir) apache works… when i try to “run” it with php534 apache do not start.
Windows Events Log says:
Nome dell’applicazione che ha generato l’errore: httpd.exe, versione: 2.2.17.0, timestamp: 0x4cc421d6
Nome del modulo che ha generato l’errore: php5ts.dll, versione: 5.3.4.0, timestamp: 0x4d0904d8
Codice eccezione: 0xc0000005
Offset errore 0x0000000000127929
ID processo che ha generato l’errore: 0x1920
Ora di avvio dell’applicazione che ha generato l’errore: 0x01cbb676acf97e04
Percorso dell’applicazione che ha generato l’errore: C:\Program Files\Apache Software Foundation\Apache2.2\bin\httpd.exe
Percorso del modulo che ha generato l’errore: C:\php\php5ts.dll
this error occurs with every your php5.3×64 version…. with ver. 5.2.6×64 it works well..
(“C:\php” is in system path variable correctly)
Any idea to solve this? Thank you in advance..
- Anindya Author
  Jan 17, 2011 at 7:30 PM
  What extensions have you enabled in your php.ini file? Please post both your httpd.conf file and your php.ini file if possible. Also, you have not mentioned the version of Windows that you are using.
sink
Jan 19, 2011 at 3:21 AM
Thank you.
Who have PHP 5.3 vc6 x64 for Apache?
ADT
Jan 19, 2011 at 1:53 PM
Hi!
@Francesco
Maybe Apache is using the old php5ts.dll somehow! Possibly there is another version of the file in a “higher” place reguarding the order of your %PATH%-variable (Maybe in your Windows/system32-folder)
@Anindya
PHP 5.3.5 and OpenSSL 1.0.0c (Apache) are available
Anindya Author
Jan 20, 2011 at 4:19 PM
@sink
I don’t think it’s possible to compile 64 bit PHP binaries with VC6 since it does not have 64 bit compiler. Why do you want VC6 binaries anyway? Even in the case of 32 bit PHP, the VC9 binaries provide better performance compared to VC6 ones.
@ADT
Thanks for letting me know. I will try and compile PHP 5.3.5 on this weekend. And I will include the latest version of OpenSSL with the next release of Apache.
Blair
Jan 20, 2011 at 5:11 PM
Thanks for these. I was looking for APC that worked with WAMP 2.1e 64bit on Windows 7 and these worked perfectly.
Just a suggestion, can you update your original post with the updated php_apc.dll without memprotect as I’m sure a lot of people won’t go looking through the comments to find the version that works nicely.
Blair
Jan 20, 2011 at 5:12 PM
Sorry, I meant WampServer 2.1d. Apparently I can’t edit my comment.
Francesco
Jan 21, 2011 at 2:17 PM
my machine: windows 7×64…
I got it….
I worked hard to find the process wich was listening on port:80 and caused installation troubles…(SQL reporting service..!!!)
just uninstall that…and now my “orchestra” is playing good..!
bye… and thx to all… 😉
Pieter du Plooy
Jan 25, 2011 at 6:26 PM
Hi there.
Is it possible for you to give me an ETA of when the 5.3.5 64 bit binary will be finished?
Regards
Pieter
Anindya Author
Jan 25, 2011 at 6:32 PM
I was thinking about compiling it last weekend but didn’t get time. Will try to compile tomorrow or definitely this weekend.
Tigran
Jan 30, 2011 at 2:56 PM
Do you plan to publish a fresh version of php x64 and apache x64 today?
If not, I will be very appreciated, if you specify the ETA 🙂 Thank you very much!
- Anindya Author
  Jan 30, 2011 at 3:09 PM
  Yes, new version of PHP but not Apache. There hasn’t been any new version of Apache since 2.2.17. Will post 2.2.18 when it’s released.
  I already compiled PHP 5.3.5 yesterday and will post it today after some testing.
Tigran
Jan 30, 2011 at 3:15 PM
Thank you very much! 🙂
Walter
Jun 4, 2011 at 4:33 AM
Seems the APC link is dead again.
Anindya Author
Jun 4, 2011 at 5:37 PM
You can find APC 3.1.6 in the PHP 5.3.6 post – http://www.anindya.com/php-5-3-6-x64-64-bit-for-windows/. I will compile newer version along with the next version of PHP 5.3.
Walter
Aug 10, 2011 at 10:02 PM
How do I get PEAR installed with this build?
Evan
Sep 8, 2011 at 10:50 PM
Hi, i need to find out what specefic apc version i need.
Im running
PHP version: 5.3.4.0
Thread Saftey Enabled
VC6
Apache Version 2.2.16.0
OS : Windows Server 2008 R2 x64
Each php_apc.dll i try causes apache not to load, any tips would be appreciated.
Abilene Fránquez
Apr 4, 2012 at 6:25 AM
Thank you sooooooooooooooooooooo much! n_n
Gerardo Flores
Sep 27, 2012 at 3:56 AM
Hello, thank you for posting. I wonder if you can help me, I’ve been trying to install apc on wamp 2.2 on a windows 7 x64 to no avail. I see you have a lot of apc dlls on your downloads on mediafire, I can’t imagine why. Must all of them be installed, (obviously not), then which of them? I downloaded php_apc without memprotect and was able to select it in the task switcher on wamp, I also added the extension and the following:
[APC]
apc.enabled = 1
apc.shm_segments = 1
apc.shm_size = 64M
apc.max_file_size = 10M
apc.stat = 1
to php.ini, next, downloaded apc.php from http://svn.php.net, but my phpinfo() file doesn’t show apc no matter what I do, and apc.php says it isn’t running.
Alan
Jan 7, 2013 at 2:56 PM
Hi
Need help i download apc.dll from your link : http://www.mediafire.com/file/jugie86axdfxod6/php_apc.dll
I get the error:
PHP Warning: PHP Startup: apc: Unable to initialize module\nModule compiled with module API=20090626\nPHP compiled with module API=20100525\nThese options need to match\n in Unknown on line 0
I’m using wampserver 2.2 php 5.4.3 apache 2.4.2 or 2.2.22, Compiler :MSVC9 (Visual C++ 2008)
Don’t know which dll i need ..Help please…
Thanks in advance
junicode
Feb 10, 2015 at 10:43 PM
Mince!! ça devenais même quoi? Depuis 2h,?, tuips.
Tu m’as sauvé gars! merci.

Gamecube Rom Highly Compressed Portable (2027)

37 Comments

Leave a Comment