Dv Operating Manual — Hicam H6 Mini

Set the threshold from low to high. When triggered, the camera will record a short clip and send a push notification to your phone.

The H6 camera typically features a small cube design, a lens on the front, two indicator lights (usually blue and yellow/red), two buttons (ON/OFF and Mode/Reset), and a MicroSD card slot. Wide-angle camera lens.

HiCam H6 Mini DV Operating Manual: The Complete User & Troubleshooting Guide hicam h6 mini dv operating manual

Insert the memory card with the gold contacts facing toward the lens side (or as indicated by the casing icon). Push until it clicks into place.

Press the Reset button (if available) or wait for the battery to drain, then recharge. Set the threshold from low to high

: Charge the device for at least 2 to 3 hours before initial use. Installing the MicroSD Card

: The red light stays solid when the battery is completely full. Wide-angle camera lens

Check the cable connection or ensure the power source is active.

Mounting & placement