Accurate data begins with a flawless physical setup. Follow these steps to eliminate centring and leveling errors. Tripod Positioning
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Tangent screws used for fine adjustments when sighting.
To map an area or collect topographic data, you must tell the total station where it is located in the world. Step 4.1: Start a New Job Press -> select ALL PROGRAMS -> select SURVEYING . leica tcr805 total station user manual
Before diving into the operations, it is important to understand what the Leica TCR805 offers. This knowledge helps you understand the settings you will be adjusting in the menus.
Dual-axis oil compensator for automatic correction of vertical and horizontal axis tilt.
For fast, unstructured measurements.
The Leica TCR805 interface is icon-driven.
Highly reflective surfaces (like traffic signs) or ultra-absorbent dark, wet surfaces may occasionally cause measurement dropouts. Switch to a standard prism if errors persist. 6. Data Management and PC Transfer
Plant the tripod firmly over the ground mark, keeping the tripod head as level as possible by eye. Accurate data begins with a flawless physical setup
Located on top of the telescope for rough targeting.
Press or F4 (SET) to lock in the orientation. Your coordinate system is now locked and oriented. Step 4.4: Collecting Points Press F4 (START) to open the Surveying screen.
Turn on the instrument. The laser plummet will activate automatically on most firmware configurations. This link or copies made by others cannot be deleted
Turn on the instrument; the laser plummet activates automatically on the startup screen.