Mks Laser Tool Setup V1.1.2.exe Download [portable] Jun 2026

: Converts standard image files (BMP, JPG, PNG) into G-code instructions.

: Simplifies connecting the laser engraver to a local network by allowing users to input SSID and password details via a USB connection. G-Code Optimization

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Mks Laser Tool Setup V1.1.2.exe Download

Many users report that the factory‑supplied microSD card that comes with the engraver contains the installer directly. For example, the user manual states: “Installation file in TF Card or USB flash disk supplied by manufacturer”. If you have misplaced the card or bought your machine second‑hand, you can still obtain the software online.

The official repository is the most reliable place for these tools. : Converts standard image files (BMP, JPG, PNG)

Select the correct corresponding to your MKS board (check Windows Device Manager under "Ports" if unsure).

MKS Laser Tool is a lightweight servicing and management application. It serves as the primary bridge between your Windows PC and a Makerbase-powered laser engraving machine. Rather than operating as design software like LightBurn or LaserGRBL, this tool focuses strictly on hardware administration. Core Functionalities Makerbase online configuration firmware tool: MKS TOOL This link or copies made by others cannot be deleted

Under Laser Settings , you can modify the PWM frequency (default 20 kHz). Lower frequencies (5–10 kHz) are better for ceramic engraving, while higher frequencies (30–40 kHz) produce smoother wood burns.

Download the CH340 driver from the official WCH website or the Makerbase GitHub. Run the driver installer and click .

Choose the appropriate COM port corresponding to your laser.

If your board is experiencing glitches or you want to update to the latest Makerbase laser firmware, use this module. Power on your MKS DLC32 board. Connect it to your PC via USB. Select from the main menu. Choose the correct COM Port assigned to your board.