Before opening the software, connect your programming cable to the PC and the radio. Turn the radio volume knob clockwise to power it on, ensuring the battery is fully charged. Step 1: Identify the COM Port Open on your Windows PC. Expand the Ports (COM & LPT) section. Note the number assigned to your cable (e.g., COM3). Step 2: Read the Radio (Back up First) Launch the Professional Radio CPS software.
, its rugged chassis caked with the dried mud of a dozen construction sites. It was a relic of a pre-digital age, a "Warhorse" of the airwaves that had gone silent.
The software is region-coded. European models use EMEA CPS (usually prefixed with PMVN), while North American counterparts (like the HT750) use AA CPS .
Sends a unique identifier when pressing the Push-to-Talk button, allowing dispatchers to know who is talking. Emergency Mode: Configures the emergency button behavior. How to Program the Motorola GP340 : Step-by-Step 1. Install the Software and Drivers motorola gp340 software
The Motorola GP340 operates on licensed commercial frequency bands (VHF 136-174 MHz or UHF 403-470 MHz).
You can define up to 16 channels, assigning specific Transmit (Tx) and Receive (Rx) frequencies. This includes: Setting the spacing to
is the (often referred to as R03.xx.xx versions). Before opening the software, connect your programming cable
Go to the "Buttons" menu to map functions to the side/top buttons. 5. Write to Radio
Often associated with the ENVN4010 software package (often referred to as 5-Tone CPS) which covers the GP320, GP330, GP340, GP360, and GP380 lines. 2. Hardware Requirements to use the Software
Connecting and programming an older radio can sometimes be tricky. The table below outlines the most common issues and their solutions: Expand the Ports (COM & LPT) section
This is where you create your channel lists.
The Professional Series CPS is compatible with modern Windows operating systems, but it's a 32-bit application, so it runs in compatibility mode on 64-bit systems.