Sinotimer Tm-630s Manual Now

Built-in CR2450 battery (retains program settings during power outages). Display: Large LCD screen. Button Functions Explained

The internal backup battery may be deeply discharged. Leave the device connected to live mains power for at least 30 minutes, then press the recessed RESET button with a pin.

The TM-630S's flexibility makes it suitable for a wide range of automation tasks:

Ultimate Sinotimer TM-630S User Guide: Programming, Wiring, and Troubleshooting sinotimer tm-630s manual

A: The TM-630S includes a manual override function. Press the MANUAL (often a red) button to cycle between ON , OFF , and AUTO modes. Selecting ON will keep the load powered regardless of the programmed schedule.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

:

, making it ideal for precise industrial or household applications. Key Technical Specifications Power Supply Options: 200–250VAC (50/60Hz) or 12VDC models available. Load Capacity: 30A (Resistive). Timing Range: 1 second to 168 hours. Up to 28 ON/OFF daily/weekly settings. Memory Backup:

Sinotimer TM-630S is a high-capacity, 7-day programmable digital timer designed for both industrial and domestic applications, such as managing streetlights, neon signs, water heaters, and agricultural facilities. It features a large LCD display and is rated for heavy loads up to (approximately 5000 Watts). Key Technical Specifications Load Capacity : 30A Resistive (250V AC). Programming : Up to 28 ON/OFF cycles per day or week. Time Interval : Minimum setting interval of Power Reserve : Built-in replaceable

The Sinotimer TM-630S Go to product viewer dialog for this item. Leave the device connected to live mains power

The timer follows your programmed schedules automatically.

Once your time and programs are set, you must tell the timer to execute them.

Connect the device to its rated input power for at least 10 minutes to charge the internal components. If it remains blank, check your incoming line voltage with a multimeter. Selecting ON will keep the load powered regardless