: Configures and tests up to 16 USB flash drives simultaneously using specialized multi-port hubs. Supported Controllers
When a USB flash drive becomes corrupted, shows a "Write Protected" error, reports "No Media" in Disk Management, or fails to format, standard Windows tools are useless. For flash drives built on Silicon Motion (SMI) controllers, the ultimate recovery method is the .
Extract the downloaded MPTool ZIP archive to a dedicated folder on your local drive.
:
: Once the drive is detected, click Start . The tool will erase the NAND, test the memory, and flash the new firmware. Critical Warnings
⚠️ 如果使用量产工具时无法识别设备或报错“Flash ID Not Found”，通常是工具版本与主控型号不匹配，请尝试更新或更换其他版本的工具。
If that matches your intent, reply "Go ahead" and I'll produce the full tutorial. If you meant a different tool or chipset, tell me which one (exact product or vendor link) and I'll tailor the tutorial. smi mptool sm32x sm34x smi mass production tool full
Click the "Setting" (or similar) button. When prompted, enter the password (usually 320 ) to unlock advanced parameters.
Click "Setting" and enter the default password: 320 . Configure Parameters: Pretest: Select "Erase All Block" for a thorough reset.
The SMI MPTool is a proprietary, low-level software application designed for flash drives built on Silicon Motion microcontrollers. Unlike standard formatting tools that interact only with the file system, the MPTool communicates directly with the controller chip and the NAND flash memory. Key Supported Architecture : Configures and tests up to 16 USB
: Settings typically require a password to unlock advanced features. Common default passwords include 320 for general settings and 1111 for the debug mode.
Bypasses "Disk is Write-Protected" loops by wiping the NAND logic and resetting the controller flags.