Power on the PLC and connect it to your PC via the USB or USB-to-RS232 cable. Open Device Manager: Right-click the Start button and select Device Manager Update Driver:
Set the default baud rate (usually 19200 or 115200 for newer modules) and click or Connection Check .
Hold down the while clicking Restart in your Windows Start Menu.
: Right-click "This PC" (or "My Computer"), select Manage , then Device Manager . xinje plc usb driver install
That’s it. Installing the Xinje PLC USB driver isn’t hard—it’s just hidden inside the programming software folder. Once you’ve done it manually one time, every Xinje PLC you connect afterward will likely be recognized automatically.
Locate the downloaded .rar or .zip file, extract it, and run the setup file (often an .exe ) with . Follow the on-screen wizard to complete the installation. Verify in Device Manager : Open Device Manager on your Windows PC.
Set the communication mode port type to (or USB if using a direct native USB protocol type option). Power on the PLC and connect it to
Plug the standard USB end directly into your computer's USB 2.0 or USB 3.0 port.
: Xinje often has separate software packages for legacy product lines like the older XC series . The driver installation process described here primarily applies to the XDPPro suite for XD, XL, and XG series PLCs.
A: Yes, but the PLC will prioritize the last active connection. Disconnect the USB cable if using a serial HMI to avoid bus contention. : Right-click "This PC" (or "My Computer"), select
I can give you custom steps to bypass your specific installation roadblock. Share public link
If you have already run the main software setup wizard, the drivers are copied to your local drive. Check C:\Program Files (x86)\Xinje\XDPro\Driver or C:\Program Files (x86)\Xinje\XCPPro\Driver .